aimspharmaeng

Communiting Mill

Description

  • Communiting Mill Consists Of SS 304 Quality Hopper, Feed Throat, And Processing Chamber (Can Be Provided In SS 316 Quality At Extra Cost) With Beaters Assembly, Heavy-Duty Motor, A Starter With Overload Relay, Three-Speed Step Pulley, Suitable Screen, SS Cladding Base Having Tubular Legs With Castors, Optional Jacket For The Feed Throat And Processing Chamber For Cooling / Heating.
  • Communiting Mill Design Make This Unit A Truly cGMP Model And Versatile In Operation & Maintenance With Latest Improvements.

Description

  • Available In Plain & Water Jacketed Model.
  • ACVFD For Main And Screw Feeder Motors As An Optional Feature.
  • Beltless Drive As An Optional Feature.
  • Beaters Are Fitted On A Splinted Shaft.
  • Beaters And Shaft Are Of Stainless Steel 410 Quality And Beaters Are Further Hardened And Chrome Plated.
  • Beaters Assembly Is Dynamically Balanced Which Reduce Vibration And Noise Level And Increases Bearings Life.
  • cGMP Point Of View With S. S. Cladding On Base, S. S. Belt Guards, S. S. Cover On Motor.
  • Castors Provided For Mobility And Breaks Can Be Applied For Fixing Machine At One Place.
  • FLP Construction Available As An Optional Feature.
  • Flame Proof Electrical Can Be Provided On Demand At Extra Cost.
  • Feed Screw To Maintain A Constant And Uniform Rate Of Feeding As An Optional Feature.
  • Fixed Beaters Assembly Is Provided As A Standard Supply Which Increase The Outputs By 10% To 30% Reduce Noise Level And Also Ease To Clean As There Are No Cavities. (If Product Demands, Swing Beaters Assembly Can Be Provided.)
  • Higher Operator’s Safety By Interlocking Belt Guard, Throat Hopper, And Chamber Assemble With The Main Motor.
  • In Compliance With cGMP Guidelines.
  • Option Of Fixed Beaters Assembly And Swing Beaters Assembly.
  • PU Castor Wheel For Mobility With Brakes.
  • No Exposed Painted Surface On Top Of The Machine. Motor Rails, Screw And Guide Rods Are Chrome Plated.
  • Side Discharge Instead Of Center Discharge.
  • Transmission Of Heat To The Chamber From Bearings Is Minimum As They Are Away In Separate Pillow Blocks. This Facilitates To Some Extent In Processing Of Heat Sensitive Products.
  • Very Less Down Time As Only Beaters Assembly Will Have To Be Reversed And Not The Complete Chamber For Making It Knife To Impact Forward Or Vice-Versa Which Can Be Done By Single Operator.

Technical Specifications

MODEL

AIMS – CM – 300

Output (Kg / Hour)

25 To 300 Kg / Hour

Rotor Blades

Fix Beaters Stainless Steel With Knife & Impact Edges

Beaters Quantity

16 Nos

Rotor Speed (RPM)

1000 / 2250 / 4500 RPM (Fix Speed)

Feeding

Feed Screw (Manual)

Feed Screw (RPM)

10 To 16 RPM

Screen Width (mm)

152 mm (6″)

Screen Area (mm)

495 mm X 135 mm

Screen Area (Sq. mm)

66,825 Sq. mm

Screen Dia (mm)

281 mm

Electric Motor (HP / kW / RPM)

7.5 HP / 5.5 kW / 1440 RPM

Electrical Power Supply

230 Volts ± 10% Or 440 Volts ± 10% / 50 Hz Or 60 Hz

3 Φ Phase / A.C. Power Supply